Literaturdatenbank v2

MachWas - CNT-Membranen - Nanoporöse Membranen hohen spezifischen Flusses aus orientierten CNTs für die energieeffiziente Aufbereitung von Ab- und Prozesswässern der Erdöl- und Erdgasindustrie; Teilprojekt 6.5. - Erarbeitung von Verfahren (Laboranalytik) zur Charakterisierung der Membranintegrität und Abwassereinigung sowie deren Einbindung in die Pilotanlagen des betrieblichen Klärprozesses

Autor: Sebastian Boldt
Jahr: 2021
Quelle: Schlussbericht zum BMBF-Verbundprojekt
Sprache: German

2733

Weitere Details

Ausgabe: 26.10.2022 16:55
Interne Referenz: 2733

Veröffentlichung öffnen

Magnetic Separation of Antibodies with High Binding Capacity by Site-Directed Immobilization of Protein A-Domains to Bare Iron Oxide Nanoparticles

Autor: Yasmin Kaveh-Baghbaderani, Raphaela Allgayer, Sebastian Patrick Schwaminger, Paula Fraga-García, and Sonja Berensmeier
Jahr: 2021
Quelle: ACS Appl. Nano Mater.
Sprache: English
Seiten: 4956–4963

B: LUMi-Reader cumulative distribution of sedimentation in a magnetic cuvette velocity including median values.
2427
LRPSA
LUMiReader PSA

12 weitere

Peptides and proteins
Ligands
Nanoparticles
Immobilization
Biopolymers
affinity tag
antibody
purification
iron oxide nanoparticles
magnetic separation
protein A
medicine

Weitere Details

Ausgabe: 4,5
Interne Referenz: 2427

Veröffentlichung öffnen

Magnetically Induced Aggregation of Iron Oxide Nanoparticles for Carrier Flotation Strategies

Autor: Sebastian P. Schwaminger, Karin Schwarzenberger, Jacqueline Gatzemeier, Zhe Lei, and Kerstin Eckert
Jahr: 2021
Quelle: ACS Appl. Mater. Interfaces
Sprache: English
Seiten: 20830–44

LUMiReader PSA
LRPSA
2426
nanoparticles

14 weitere

Sedimentation
Metal oxide nanoparticles
Magnetic properties
Organic compounds
iron oxides
magnetic separation
microplastics
PMMA
oleate
colloidal stability
flotation
aggregation
Setup for measuring the particle sedimentation velocity in magnetic fields with a modified LUMiReader. The sedimentation velocity is a result of the magnetophoretic force (Fmag)
the gravitational force (Fgrav) and the drag force (Fdrag) on the nanoparticles.

Weitere Details

Ausgabe: 13, 17
Interne Referenz: 2426

Veröffentlichung öffnen

MECHANISTIC STUDY FOR ANTI-MELANOGENIC PROPERTY OF TETRAHYROCURCUMIN AND ENHANCEMENT OF BIOACCESSIBILTY THROUGH BOTH TOPICAL DELIVERY AND ORAL DELIVERY BY INNOVATIVE FORMULATIONS

Autor: Xudong Tang
Jahr: 2021
Quelle: Dissertation
Sprache: English
Seiten: 1-145

2588
Tetrahydrocurcumin (THC) is one of the major metabolites of curcumin
and it possess a variety of health-related benefits
such as anti-cancer

14 weitere

antioxidant
anti-inflammation
etc.
LUMiSizer
LS;After the fabrication of the nanoemulsion
the porotypes were then characterized using
Accelerated and real time stability test In order to evaluate the stability for the nanoemulsion
LumiSizer was first used for the purpose of screening the formulations
Fabrication of the nanoemulsions Nanoemulsion was prepared following the method as described in Fig.31. A series of formulations were produced
and their stability performance were first predicted using LUMiSizer.
instability index
The objective is to solve the aqueous solubility challenge for THC and enhance its bioaccessibility through both the topical and oral route respectively
medicine
pharmaceutical

Weitere Details

Ort: School of Graduate studies, Rutgers, The State University of New Jersey, USA
Interne Referenz: 2588

Veröffentlichung öffnen

Microstructural and Texturizing Properties of Partially Pectin-Depleted CellWall Material: The Role of Botanical Origin and High-Pressure Homogenization

Autor: Jelle Van Audenhove, Tom Bernaerts , Novita I. Putri , Erick O. Okello, Luisa Van Rooy, Ann M. Van Loey and Marc E. Hendrickx
Jahr: 2021
Quelle: Foods
Sprache: English
Seiten: 2644

LUMiFuge
LF
LUMiSizer
LS

9 weitere

2576
fruits and vegetables; high-pressure homogenization; partial pectin depletion; cell wall material; rheology; water binding capacity
Measurement ofWater Binding Capacity The WBC of the AcUF was measured by performing centrifugation in suspended state
In the current study
the texturizing properties of partially pectin-depleted cell wall material (CWM) of apple
carrot
onion and pumpkin
and the potential of functionalization by high-pressure homogenization (HPH) were addressed.
nutrtition

Weitere Details

Ausgabe: 10
Interne Referenz: 2576

Veröffentlichung öffnen

Modification of PVDF hydrophobic microfiltration membrane with a layer of electrospun fibers of PVP-co-PMMA: Increased fouling resistance

Autor: Diego Wanke, Adrianoda Silva, Cristiane Costa
Jahr: 2021
Quelle: Chemical Engineering Research and Design
Sprache: English
Seiten: 268-276

2501
The oil emulsion was prepared by dispersing 0.1 %wt. of canola oil in deionized water
with SDS as emulsifier (20 %wt.
related to the oil)

20 weitere

using the ultra turrax disperser (IKA T25 digital)
for 20 min at 5000 rpm. Lumisizer (LUM GmbH) was used to determine the oil particle size
LS
distribution
analysis
psd
psa
Membrane
Surface modification
Electrospinning
Polydopamine
Mussel-inspired
Oily wastewater
A wide range of materials can be used for membrane production for wastewater treatment using membrane technology. Polymeric membranes have the disadvantage of high fouling tendency when used for oil-water wastewater
reducing the membrane flux. In this study
a simple superficial modification with polydopamine (PDA) coating was used
combined with the electrospinning technique to create an additional layer over the hydrophobic commercial polyvinylidene fluoride (PVDF) membrane
to achieve a hydrophilic surface and fouling resistance for oil-water separation. PVDF microfiltration membrane
with 0.22 of pore size
was modified with PDA by deposition for 12 h. A layer of polyvinylpyrrolidone-co-polymethyl methacrylate (PVP-co-PMMA) was electrospun over the modified polydopamine membrane.

Weitere Details

Ausgabe: 171
Interne Referenz: 2501

Veröffentlichung öffnen

Modified Rhamnogalacturonan-Rich Apple Pectin-Derived Structures: The Relation between Their Structural Characteristics and Emulsifying and Emulsion-Stabilizing Properties

Autor: Jessika N. Humerez-Flores , Sarah H. E. Verkempinck, Clare Kyomugasho, Paula Moldenaers, Ann M. Van Loey and Marc E. Hendrickx
Jahr: 2021
Quelle: Foods
Sprache: English
Seiten: 1586

2424
apple pectin; rhamnogalacturonan-I; side chains; structuralmodifications; emulsion; stability
LUMiFuge
LF

6 weitere

LUMiSizer
LS
food
nutrition
Accelerated Physical Stability Test
Evaluation of the physical stability of the pectin-containing emulsions

Weitere Details

Ausgabe: 10
Interne Referenz: 2424

Veröffentlichung öffnen

Modular Type III Porous Liquids based on Porous Organic Cage Microparticles

Autor: Aiting Kai, Benjamin D. Egleston, Rob Clowes, Michael E. Briggs, Andrew I Cooper and Rebecca L. Greenaway
Jahr: 2021
Quelle: Materials Chemistry
Sprache: English
Seiten: 1-19

2479
LS
To quantify the dispersion stability
a LUMiSizer® was used to accelerate the creaming or sedimentation process for 12.5 wt. % dispersions of CC3-R/CC3-S (particle size: 500–700 nm) in both silicone oil and [BPy][NTf2]. Porous organic cage

4 weitere

Porous liquids
The dispersion of particulate porous solids in size-excluded liquids has emerged as a method to create Type III porous liquids
mostly using insoluble microporous materials such as metal-organic frameworks (MOFs) and zeolites. Here
we present the first examples of Type III porous liquids based on porous organic cages (POCs).

Weitere Details

Interne Referenz: 2479

Veröffentlichung öffnen

Mono- and Dicationic DABCO/Quinuclidine Composed Nanomaterials for the Loading of Steroidal Drug: 32 Factorial Design and Physicochemical Characterization

Autor: Ana R. Fernandes, Elena Sanchez-Lopez, Antonello Santini, Tiago dos Santos, Maria L. Garcia, Amélia M. Silva and Eliana B. Souto
Jahr: 2021
Quelle: Nanomaterials
Sprache: English
Seiten: 2758

2533
LUMiSizer
LS
cationic nanoemulsions; DABCO surfactants; quinuclidine surfactants; ocular administration; triamcinolone acetonide

5 weitere

Oil-in-water nanoemulsions (NEs) are considered a suitable nanotechnological approach to improve the eye-related bioavailability of lipophilic drugs.Triamcinolone acetonide (TA) is one of the first pharmacologic strategies applied as an intravitreal injection in the treatment of age-related macular degeneration (AMD)
pharmaceutical
medicine
Accelerated Stability Analysis
simulated long-term physical stability of NE

Weitere Details

Ausgabe: 11(10)
Interne Referenz: 2533

Veröffentlichung öffnen

Nanocomposite hydrogels from the self-assembly of an amphiphilic polymer and fullerene

Autor: Théo MERLAND
Jahr: 2021
Quelle: THESE DE DOCTORAT
Sprache: English
Seiten: 1-226

2643
LUMiSizer
LS
The stability of the Ouzo particles was studied by both macroscopic observations and analytical centrifugation

14 weitere

The morphology and size of the particles was assessed by TEM
light scattering and analytical centrifugation.
Analytical centrifugation
particles characterization by transmission electron microscopy
light scattering and analytical centrifugation
Buckminsterfullerene (C60) is the most common member of the fullerenes family
which are the zero-dimensional allotropic forms of carbon
polysoaps XCn are amphiphilic macromolecules that consist
in this work
of a poly(styrene) backbone of which X% units carry surfactant-like units based on a quaternary ammonium group as the polar head and bearing a long alkyl side chain with n carbon atoms. When these polymers are solubilized in water
they self-assemble into micelles of various morphologies depending on their chemical structure: lamellas for 35mol%<X<55mol% and worm-like micelles for 65mol%<X<80mol%. In both cases
at higher concentration
above a percolation concentration
physical hydrogels are formed that display viscoelastic properties. Hydrogels based on polymeric cylindrical micelles are more homogeneous and dynamic than hydrogels based on lamellas.

Weitere Details

Ort: LE MANS UNIVERSITE COMUE UNIVERSITE BRETAGNE LOIRE, France
Interne Referenz: 2643

Veröffentlichung öffnen

Nonaqueous inkjet ink and printed material of same

Autor: 篤美白井佐々木寛
Jahr: 2021
Quelle: Patent application
Sprache: Japanese

2813
LRX
LUMiReader X-Ray
One embodiment of the present invention relates to a nonaqueous inkjet ink which contains (A) an organic solvent

18 weitere

(B) scale-like metal particles and (C) an additive for surface tension regulation
wherein: the organic solvent (A) contains (a1-1) an alkylene glycol monoalkyl ether solvent represented by general formula 1 in an amount of from 10% by mass to 75% by mass relative to the total amount of the organic solvent (A); the scale-like metal particles (B) have an average thickness (t) of from 1 nm to 50 nm; and the content of the scale-like metal particles (B) relative to the total amount of the nonaqueous inkjet ink is from 0.1% by mass to 5% by mass.The settling distance can be measured using
for example
a separation characteristic analyzer (LUMiReader X-Ray manufactured by MS Scientific Co.
Ltd.). Specifically
2 mL of well-mixed ink is encapsulated in a sample cell (a rectangular parallelepiped with internal dimensions of 10 mm in length × 10 mm in width × 80 mm in height)
and the horizontal X-ray transmittance of the sample cell is measured immediately after encapsulation. To do. Next
a graph is created in which the measurement results are plotted
with the horizontal axis representing the measurement position of the sample cell (height of the sample cell (mm)) and the vertical axis representing the X-ray transmittance (%) at the measurement position. The X-ray transmittance is low on the bottom surface side of the sample cell (the height of the sample cell is 0 mm)
and is high on the opening side of the sample cell (the height of the sample cell is 20 mm). When observing the change in X-ray transmittance from the bottom surface side to the opening side of the sample cell
the "position (height) A of the sample cell" when the X-ray transmittance changes by 10% / mm or more is set.
The upper end (that is
the interface between the suspension phase and the supernatant phase) where the scaly metal particles (B) in the ink are present. In the graph
the position (height) of the sample cell at the point where the X-ray transmittance starts to change by 10% / mm or more can be defined as the “position (height) A of the sample cell”. Then
24 hours later
the same measurement is performed to obtain the "position (height) B of the sample cell". The distance at which the position of the upper end changes during 24 hours is defined as the settling distance (settling distance (mm / day) = A (mm) -B (mm)). Toyo Ink SC Holdings Co.
Ltd.
Toyocolor Co.

Weitere Details

Ausgabe: WO2021095339A1
Interne Referenz: 2813

Veröffentlichung öffnen

On the drying kinetics of non-spherical particle-filled polymer films: A numerical study

Autor: Víctor-Alfonso Gracia-Medrano-Bravo, Philip Scharfer, Wilhelm Schabel
Jahr: 2021
Quelle: AIChE J.
Sprache: English
Seiten: 1-11

2495
transport phenomena and fluid mechanics
coating
drying

10 weitere

drying regime maps
plate-like particles
polymer-particle composites
LUMiSizer
LS
Sedimentation measurements
sedimentation rate was measured using a LUMiSizer centrifuge
During the coating and drying of thin polymer-particle composites
the particle geometry has a big impact on the prediction of concentration profiles in the dry film. In this work
a plate-like geometry is used to evaluate the mass transport of the particles with the aspect ratio as a variable. The experimental determination of the viscosity and sedimentation rates allows to simulate concentration profiles in the wet film while drying.

Weitere Details

Ausgabe: e17398
Interne Referenz: 2495

Veröffentlichung öffnen

On the properties of nanosilicate-based filled dental adhesives: Synthesis, characterization, and optimized formulation

Autor: Laleh Solhi, Mohammad Atai, Azizollah Nodehi, Mohammad Imani
Jahr: 2021
Quelle: Journal of the Mechanical Behavior of Biomedical Materials
Sprache: English
Seiten: 104498

2421
LUMiReader PSA
LRPSA
biotechnology

9 weitere

hybrid nanoparticles (poly (acrylic acid)-grafted nanoclay/nanosilica
respectively
with platelet and spherical morphologies
abbreviated as PAA-g–NC–Sil) in different concentrations (0
0.2
0.5
1
2 and 5 wt%) to an experimental dentin bonding system and investigated the physical properties of the filled adhesive and its shear bond strength (μ-SBS) to dentin
stability of modified fillers dispersion by separation analysis

Weitere Details

Ausgabe: 119
Interne Referenz: 2421

Veröffentlichung öffnen

On the State and Stability of Fuel Cell Catalyst Inks

Autor: Shalmali Bapat, Christopher Giehl, Sebastian Kohsakowski, Volker Peinecke, Michael Schäffler, Doris Segets
Jahr: 2021
Quelle: Advanced Powder Technology
Sprache: English
Seiten: 3845-3859

Analytical centrifugation (AC) was used to study the state and stability of inks.
2337
LUMiSizer
LS

9 weitere

Analytical centrifugation
PEMFC Catalyst ink
Dispersion
Stability trajectory
Rheology
we demonstrate several possibilities for qualitative and quantitative assessment of the catalyst inks
by employing a table-top AC device
namely LUMiSizer
analytical photocentrifuge

Weitere Details

Ausgabe: 32, Issue 10
Interne Referenz: 2337

Veröffentlichung öffnen

One-step preparation of Cr2O3-based inks with long-term dispersion stability for inkjet applications

Autor: Dongjin Xie, Qiuyi Luo, Shen Zhou, Mei Zu and Haifeng Cheng
Jahr: 2021
Quelle: Nanoscale Advances
Sprache: English

2425
LUMiSizer
LS
Inkjet printing of functional materials has shown a wide range of applications in advertising

9 weitere

OLED display
printed electronics and other specialized utilities that require high-precision
mask-free
direct-writing deposition techniques. ball-milled Cr2O3 ink and (c) colloidal Cr2O3 ink
dispersion stability of the colloidal ink compared with the conventional top-down ball-milled ink is demonstrated by an analytical centrifuge technology
pigments
instability index
additive manufacturing
3d printing

Weitere Details

Ausgabe: Advance Article
Interne Referenz: 2425

Veröffentlichung öffnen

Percolation of rigid fractal carbon black aggregates

Autor: Fabian Coupette, Long Zhang, Björn Kuttich, Andrei Chumakov, Stephan V. Roth, Lola González-García, Tobias Kraus, and Tanja Schilling
Jahr: 2021
Quelle: J. Chem. Phys.
Sprache: English
Seiten: 124902

2480
LUMiSizer
LS
Size distribution characterization

8 weitere

Carbon black diameters were analyzed by analytical centrifugation (AC) using a LUMiSizer 651
psd
psa
particle size distribution
analysis
carbon black/toluene suspensions
blue wavelength of 470 nm
We examine network formation and percolation of carbon black by means of Monte Carlo simulations and experiments.

Weitere Details

Ausgabe: 155
Interne Referenz: 2480

Veröffentlichung öffnen

Physical properties and salt release of potato starch-based emulsion gels with OSA starch-stabilized oil droplets

Autor: Yanhui Zhang, Hao Yang, Hongxia Zheng, Dongdong Yuan, Like Mao
Jahr: 2021
Quelle: LWT
Sprache: English
Seiten: 110929

LUMiSIzer
LS
nutrition
2373

8 weitere

Starch
Microstructure
Rheology
Texture
Salt
Emulsion gels with potato starch in the continuous phase and octenyl succinic anhydride (OSA) starch at the interface were developed
and they were used to modulate salt release
Creaming stability of the emulsions was evaluated by a multi-sample analysis centrifuge LUMiSizer

Weitere Details

Ausgabe: 141
Interne Referenz: 2373

Veröffentlichung öffnen

Physicochemical Properties of Modified Starches Obtained by Anti-Solvent Precipitation Containing Anthocyanins from Jambolan (Syzygium cumini) Fruit

Autor: Kennya Thayres dos Santos Lima, Jussara Garcez, Maria Jaízia dos Santos Alves, Alcilene Rodrigues Monteiro, Germán Ayala Valencia
Jahr: 2021
Quelle: Starch
Sprache: English
Seiten: 2000221

2507
centrifugal liquid sedimentation method
using a LUMiSizer
LS

15 weitere

This study aims to develop and characterize modified starch particles containing anthocyanins (ACNs) from jambolan (Syzygium cumini) fruit
produced by an anti-solvent precipitation method. Trapping efficiency
particle size distribution
surface charge
crystalline structure
chemical bonds
thermal properties
moisture content
water activity
color
and desorption experiments are carried out in modified cassava starch (MCS) and modified potato starch (MPS)
both containing ACNs. Physicochemical properties of MCS and MPS both containing ACN (MCS-ACN and MPS-ACN) are compared using native cassava and potato starches
as well as modified cassava and potato starches without ACNs. ACNs are trapped into the modified starches and the trapping efficiency value oscillates between 9.89% and 12.37%. The resulting MCS-ACN and MPS-ACN- powders display bimodal distributions with particle size lower than 900 nm and amorphous structure. Furthermore
the MCS-ACN and MPS-ACN powders show red color typical of ACNs and they are completely soluble in water and acidified water solutions at room temperature. This research reports for the first-time
information regarding the stabilization of ACNs using modified starch particles.

Weitere Details

Ausgabe: 73, Issue3-4
Interne Referenz: 2507

Veröffentlichung öffnen

Pickering emulsions stabilized by spherical cellulose nanocrystals

Autor: Hui Dong, Qijun Dingm Yifei Jiang, Xia Li, Wenjia Han
Jahr: 2021
Quelle: Carbohydrate Polymers
Sprache: English
Seiten: 118101

2504
LUMiSizer
LS
the emulsions were transferred into the laboratory standard instrument stability analyzer LUMi Sizer

5 weitere

Nano cellulose has attracted more attentions as promising stabilizer candidate for Pickering emulsions due to its renewable and biocompatible properties. In this work
spherical cellulose nanocrystals (S-CNCs) (diameter 30–60 nm) were prepared by mixed acid hydrolysis of mercerized microcrystalline cellulose under the treatment of ultrasonic.Spherical cellulose nanocrystals
Pickering emulsion
high stability
Ultra-low viscosity

Weitere Details

Ausgabe: 265
Interne Referenz: 2504

Veröffentlichung öffnen

Pilot scale isolation of exopolysaccharides from Streptococcus thermophilus DGCC7710: Impact of methodical details on macromolecular properties and technofunctionality

Autor: Carsten Nachtigall, Georg Surber, Jannis Bulla, Harald Rohm, Doris Jaros
Jahr: 2021
Quelle: Eng Life Sci.
Sprache: English
Seiten: 220-232

2488
Emulsion stability was investigated with an analytical photo-centrifuge LUMiSizer
LS
Creaming velocity distribution

21 weitere

particle characterisation
Exopolysaccharides (EPS) from Streptococcus thermophilus provide similar technofunctionality such as water binding
viscosity enhancing and emulsifying effects as commercial thickeners at a significant lower concentration. Despite their high technofunctional potential
hetero polysaccharides from lactic acid bacteria are still not commercially used in unfermented foods
as the small amount of synthesised EPS calls for a high isolation effort. This study aims to analyse the macromolecular properties of EPS and cell containing isolates from S. thermophilus DGCC7710 obtained by different isolation protocols
and to link these data to the technofunctionality in model food systems. biotechnology
food
nutrition
cEPS
capsular exopolysaccharides; EPS
Exopolysaccharides; FD
freeze-dried; fEPS
free exopolysaccharides; SD
spray-dried; S. thermophilus
Streptococcus thermophilus; tEPS
total exopolysaccharides
acid milk gels
emulsion
exopolysaccharides
isolation
lactic acid bacteria

Weitere Details

Ausgabe: 21
Interne Referenz: 2488

Veröffentlichung öffnen

Literaturdatenbank

Literatur durchsuchen

Magnetic Separation of Antibodies with High Binding Capacity by Site-Directed Immobilization of Protein A-Domains to Bare Iron Oxide Nanoparticles

Magnetically Induced Aggregation of Iron Oxide Nanoparticles for Carrier Flotation Strategies

MECHANISTIC STUDY FOR ANTI-MELANOGENIC PROPERTY OF TETRAHYROCURCUMIN AND ENHANCEMENT OF BIOACCESSIBILTY THROUGH BOTH TOPICAL DELIVERY AND ORAL DELIVERY BY INNOVATIVE FORMULATIONS

Microstructural and Texturizing Properties of Partially Pectin-Depleted CellWall Material: The Role of Botanical Origin and High-Pressure Homogenization

Modification of PVDF hydrophobic microfiltration membrane with a layer of electrospun fibers of PVP-co-PMMA: Increased fouling resistance

Modified Rhamnogalacturonan-Rich Apple Pectin-Derived Structures: The Relation between Their Structural Characteristics and Emulsifying and Emulsion-Stabilizing Properties

Modular Type III Porous Liquids based on Porous Organic Cage Microparticles

Mono- and Dicationic DABCO/Quinuclidine Composed Nanomaterials for the Loading of Steroidal Drug: 32 Factorial Design and Physicochemical Characterization

Nanocomposite hydrogels from the self-assembly of an amphiphilic polymer and fullerene

Nonaqueous inkjet ink and printed material of same

On the drying kinetics of non-spherical particle-filled polymer films: A numerical study

On the properties of nanosilicate-based filled dental adhesives: Synthesis, characterization, and optimized formulation

On the State and Stability of Fuel Cell Catalyst Inks

One-step preparation of Cr2O3-based inks with long-term dispersion stability for inkjet applications

Percolation of rigid fractal carbon black aggregates

Physical properties and salt release of potato starch-based emulsion gels with OSA starch-stabilized oil droplets

Physicochemical Properties of Modified Starches Obtained by Anti-Solvent Precipitation Containing Anthocyanins from Jambolan (Syzygium cumini) Fruit

Pickering emulsions stabilized by spherical cellulose nanocrystals

Pilot scale isolation of exopolysaccharides from Streptococcus thermophilus DGCC7710: Impact of methodical details on macromolecular properties and technofunctionality

Externe Veröffentlichung öffnen?